Tapo C220 firmware
Hi,
I've been searching the web for the latest firmware for the Tapo C220 but haven't found any. All I came across were the release notes on TP-Link's website. Can you help me with this? I need to reflash my Tapo C220 unit because I think it got bricked during the initial setup due to a firmware update. It can't be reset and just keeps blinking red.
Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
You can refer to the instructions below to troubleshoot if your camera got bricked.
What to do if my Tapo Camera gets bricked after a firmware update?
If the suggestions in the above thread do not help, you can contact your retailer or local support to check if the camera is under warranty.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
You can refer to the instructions below to troubleshoot if your camera got bricked.
What to do if my Tapo Camera gets bricked after a firmware update?
If the suggestions in the above thread do not help, you can contact your retailer or local support to check if the camera is under warranty.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee
Hi, can you provide the firmware of Tapo C220? Thanks.
- Copy Link
- Report Inappropriate Content
@Solla-topee
Can I use the firmware of tapo C200 with the tapo C220?
- Copy Link
- Report Inappropriate Content
Hi,
The firmware of the Tapo C200 can't be used on Tapo C220. In your situation, you can refer to Case 2 in the thread to troubleshoot.
Best Regards
- Copy Link
- Report Inappropriate Content
If I can't use the firmware of the C200, can you provide the firmware of the C220?
I have tried the troubleshooting from the case 2 and it doesn't solve the problem.
Please provide the firmware of the C220.
- Copy Link
- Report Inappropriate Content
Case 2 troubleshooting did nothing. I left my C220 for 2 days now beside the router it initially connected during the firmware update.
But I have 2 units of C220, is there any way to copy the firmware of the other 1 using microSD card? The other 1 is functional and gas 1.1.4 firmware.
Also, why don't you just give us the firmware?
- Copy Link
- Report Inappropriate Content
@jnmtancinco Hi :), why not replace your camera with the retailer or the tp-link local support as per the suggestions here: https://community.tp-link.com/en/smart-home/forum/topic/698536?replyId=1408610
- Copy Link
- Report Inappropriate Content
@jnmtancinco don't do it 
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 496
Replies: 8
Voters 0
No one has voted for it yet.