Early Access Pre-release Firmware for Archer AX53/AX58 Supports EasyMesh in AP Mode, Ethernet Backhaul, ECO Mode
Updated on Jun 3, 2025:
The official version 1.4.3 Build 20250314 is gradually rolling out, and users can check for updates on the AX53's web interface or through the Tether App and install the latest version. We strongly recommend upgrading to this version to improve the overall experience.
Users can also get a direct download link of the new version from the website as follows:
https://www.tp-link.com/support/download/archer-ax53/v1/#Firmware
This thread will be locked for further comments then. Please start a new thread to open a discussion if you have any questions.
---------------------------------------------------------------------------------------------------------------------------------------
Hello Everyone,
We're thrilled to announce the release of the pre-release firmware for Archer AX53/AX58 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, ECO Mode, etc. We encourage you to try out this version of firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
New Features and Modifications:
1. Added Ethernet Backhaul for EasyMesh.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
5. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
6. Added IoT Network.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added support for VPN Client.
11. Added support for WireGuard.
12. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
13. Added new functions to the Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
14. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
15. Improved client type identification accuracy.
16. Optimized the overall system stability and performance.
Firmware Download:
Before the Upgrade
(1) IMPORTANT!: Once upgraded to the 1.4.x firmware, you CANNOT downgrade back to the 1.3.x or 1.2.x version.
(2) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(3) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(4) This pre-release firmware for Archer AX53/AX58 V1 can be applied to all versions (EU/US/AU/KR/etc.).
(5) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(6) The screenshots in this article are taken from the web GUI or Tether App of Archer AX55 V1 for reference.
Direct Firmware Download Link
| Archer AX53/AX58_V1 | Archer AX53/AX58_V1_1.4.3 Build 20250314 (Pre-release Firmware) UPDATED |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Thank you for your continued support and for being part of our community.
Update Log
Apr 11th, 2025:
Update to provide a new 1.4.3 pre-release version.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kevin_Z pLEASE I WANNA GO BACK TO 1.4.2 IN ARCHER AX 53 V1
PLEASE HELP ME
WHILE CONNECTING ETHERNET BLACKHAUL THE DEVICE IS GETTING LAGGY AND WIFI PERFORMANCE IS ALSO NOT GOOD please help :(
MY ROUTER AX53 V1
- Copy Link
- Report Inappropriate Content
Maybe you should wait for a answer....
- Copy Link
- Report Inappropriate Content
@DJPRMF How much time will it take bro
i just need 1.4.1 version or 1.4.2 
stable version needed :( facing issues with 1.4.3
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@woozle thanks a million trillion tribillion T_T
just asking can i get all future updates bro ?
like whwnever Tplink pushes updates will that automactically come to me or else do i need to manually install firmware files and upload everytime ?
and web ui is laggy too much bro even after downgraded ? i dont know why its a new router bought just yesterday ! do i need to replace ? and is the lag because of the firmware ive previously installed ?
- Copy Link
- Report Inappropriate Content
Hi@Danny--,
Did you downgrade firmware back to 1.4.2? Does the issue persist?
May I know is the internet speed normal on your network?
Your problem description is different from others. If it is a lag, I suggest you compare logging into the router's web management page using different browsers.
If the router randomly disconnects at night, please also check whether the network of the ISP device in front of the main router is still working stably at this time?
- Copy Link
- Report Inappropriate Content
Hi @Joseph-TP
Thanks for getting back.
Yes, I am currently on the latest firmware — 1.4.2 Build 20250305 rel.56105 — and I have not downgraded.
To clarify again, this is not a lag or login issue — the router UI works fine across browsers. The real issue is with EasyMesh switching the Archer C5 from Ethernet backhaul to Wireless, even though it's physically connected via LAN to the AX10, which itself is wired to the main router (AX53).
I'm using a stable PPPoE connection at 400 Mbps, and there's no disconnection or bandwidth issue. The problem is EasyMesh auto-switching connection types, even when Ethernet is properly plugged in and active.
As shown in my earlier screenshots, the topology keeps randomly shifting, and this messes up the consistency of my mesh network. What I really need is a setting or rule in EasyMesh to force satellite devices to use Wired backhaul only, so they don't fall back to Wireless without user control.
This is frustrating, especially when stability is needed. Please consider passing this to the firmware team for a fix or future feature.
Thanks again!
— Danny
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z DNS over HTTPS / DNS over TLS, a much needed feature that was requested long time ago, is still not here. Please implement this feature as soon as possible.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 32246
Replies: 210
Voters 1
