Early Access Pre-release Firmware for Archer AX53/AX58 Supports EasyMesh in AP Mode, Ethernet Backhaul, ECO Mode
Updated on Jun 3, 2025:
The official version 1.4.3 Build 20250314 is gradually rolling out, and users can check for updates on the AX53's web interface or through the Tether App and install the latest version. We strongly recommend upgrading to this version to improve the overall experience.
Users can also get a direct download link of the new version from the website as follows:
https://www.tp-link.com/support/download/archer-ax53/v1/#Firmware
This thread will be locked for further comments then. Please start a new thread to open a discussion if you have any questions.
---------------------------------------------------------------------------------------------------------------------------------------
Hello Everyone,
We're thrilled to announce the release of the pre-release firmware for Archer AX53/AX58 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, ECO Mode, etc. We encourage you to try out this version of firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
New Features and Modifications:
1. Added Ethernet Backhaul for EasyMesh.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
5. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
6. Added IoT Network.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added support for VPN Client.
11. Added support for WireGuard.
12. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
13. Added new functions to the Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
14. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
15. Improved client type identification accuracy.
16. Optimized the overall system stability and performance.
Firmware Download:
Before the Upgrade
(1) IMPORTANT!: Once upgraded to the 1.4.x firmware, you CANNOT downgrade back to the 1.3.x or 1.2.x version.
(2) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(3) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(4) This pre-release firmware for Archer AX53/AX58 V1 can be applied to all versions (EU/US/AU/KR/etc.).
(5) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(6) The screenshots in this article are taken from the web GUI or Tether App of Archer AX55 V1 for reference.
Direct Firmware Download Link
| Archer AX53/AX58_V1 | Archer AX53/AX58_V1_1.4.3 Build 20250314 (Pre-release Firmware) UPDATED |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Thank you for your continued support and for being part of our community.
Update Log
Apr 11th, 2025:
Update to provide a new 1.4.3 pre-release version.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Just to clarify. Is the pre-release version of the firmware for AX53 released on the 11th of April the same as Archer AX53(EU)_V1_1.4.3 Build 20250314 publicly released on 2025-05-13? Files seem to be identical so no need to update again, correct?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z DoH and DoT for AX53 V1 please.. thats also a crucial feature
- Copy Link
- Report Inappropriate Content
@Kevin_Z Thanks for the pre-release all seems to work well wrt to Ethernet Backhaul with EasyMesh.
Only issue I am facing is when Enabling IoT network it does not get populated / transferred to the Satellite Routers.
I do have IoT signal on the Main Router, but as soon as i walk away too far it disappears eventhough my main Wifi connection are still at full bars.
Thus, only my main wifi network gets broadcasted to the other Satellite routers. Are you aware of this?
I have 4 x Archer C80's and 2 x AX53 Routers. The main Router is an AX53 and all the rest of the routers are Satellite Routers.
Archer AX53 v1.0 Routers = 1.4.3 Build 20250314 rel.78903(4555)
Archer C80 v1.0 Routers = 1.13.15 Build 240812 Rel.53634n(4555)
Thanks for your Support.
Leon
- Copy Link
- Report Inappropriate Content
@Kevin_Z
I am unable to upload to the new pre-release firmware 1.4.3 to the router it always shows upload error without trying to upload the firmware to the router.
Please help.
Please check the screenshots below
- Copy Link
- Report Inappropriate Content
@Crashoveride007 that's very strange.
I used this version https://static.tp-link.com/upload/beta/2025/202504/20250411/Archer%20AX53_V1_20250317.zip with no issues.
ax53v1-up-all-ver1-4-3-P1[20250314-rel78903]-1024_sign_2025-03-17_09.55.28.bin
Leon
- Copy Link
- Report Inappropriate Content
I also downloaded from the same link but am not able to upload it.
Don't know why.
I did a hard factory reset and a soft factory reset.
Used LAN connection and used WiFi but in both cases faced the same issue.
I have 2 AX53's both had the same issue.
I even used different browsers but no difference
- Copy Link
- Report Inappropriate Content
You sure it is also Archer AX53 v1.0?
Anyway, maybe someone in this Forum can comment if they faced the same issue before on Archer AX53 v1.0
Maybe try the release before the 17th March (Update) and then the latest. Just a thought.
Other than that, I really don't know. :-(
- Copy Link
- Report Inappropriate Content
I don't have the link to the march release and as you can see from the screenshot the router is AX53 v1.0
I am also waiting for support on the same.
- Copy Link
- Report Inappropriate Content
I seems it is removed. I would have expected to change https://static.tp-link.com/upload/beta/2025/202504/20250411/Archer%20AX53_V1_20250317.zip
to .....20250314.zip.
Sorry I could not assist.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 32493
Replies: 211
Voters 1
