Early Access Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More
Hello Everyone,
We're thrilled to announce the release of the pre-release firmware for Archer AX80 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience, including DoH/DoT, EasyMesh in AP mode, Satellite Router Management, ECO Mode, etc. We encourage you to try out this version of firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
New Features and Modifications:
1. Added Ethernet Backhaul for EasyMesh.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
5. Added ECO mode on Advanced > System > ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router reduces power consumption to conserve energy. Please note that this also results in a reduction in network speed and coverage.
6. Added IoT Network.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added support for VPN Client.
10. Added support for WireGuard.
11. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect to the VPN Server successfully
12. Added new functions to the Tether App: EasyMesh, OpenVPN Server/Client, ECO Mode, Wireless Schedule, Guest Portal Network
Note: Please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
13. Added User Experience Improvement Program (UEIP).
Please participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced > System > About page. Your feedback will help us enhance the product.
14. Optimized the L2TP/IPsec VPN performance.
15. Enhanced USB sharing performance.
16. Fixed the issue that the Tether App displays OneMesh instead of EasyMesh when adding EasyMesh agents.
17. Optimized the overall system stability and performance.
Firmware Download:
Before the Upgrade
(1) IMPORTANT! Once upgraded to 1.3.x firmware, you CANNOT downgrade back to 1.1.x version.
(2) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(3) For the sake of insurance, it's always recommended to save a copy of the router's Backup Config file before upgrading or downgrading.
(4) This pre-release firmware for Archer AX80 V1 can be applied to both the EU and JP versions.
(5) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(6) The screenshots in this article are taken from the web GUI or Tether App of Archer AX55 V1 for reference.
Direct Firmware Download Link
| Archer AX80(EU/JP)_V1 | Archer AX80(EU/JP)_V1_1.3.1 Build 20250813 (Beta Firmware) |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best products and support.
- Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Thank you for your continued support and for being part of our community.
Update Log
Aug 15th, 2025:
Update to provide an updated download link for Beta Firmware.
Bug Fixes:
Fixed the reported issue where the AX80's web interface menus become invisible after upgrading to the pre-release firmware.
Aug 8th, 2025:
Update to include a new note that this release also fixed the issue that the Tether App displays OneMesh instead of EasyMesh when adding EasyMesh agents.
Aug 6th, 2025:
Release of the article.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Yes I have.
I unplugged the ethernet cable, power off the router/satellite, plug the ethernet cable back in and power on the satellite to get it back to 1000mbps.
I’m not sure what causes this but sometimes when I power on/off the satellite router, my backhaul speed drops from 1000mbps to 100mbps, but this rarely happens.
- Copy Link
- Report Inappropriate Content
Just tried the beta firmware and no changes for your points #1 and #2.
On #2 (UNII-3 Channel availability) I doubt we will get this under the EU firmware due to EU power level restrictions TP-Link have to follow. Example here in Australia UNII-3 allows 4000mW versus a range of 100mW to 1000mW on the lower channels. I've tested with a few borrowed routers that use AU or US firmware and having UNII-3 channels makes a difference to a number of connections here which are at their limits. Plus tends to be interference free a lot
more.
I suspect our solution is TP-Link authorise us to use US firmware for Indonesia and Australia customers. But I have no idea if that's feasible - there may be hardware limitations in allowing EU models to flash US firmware just to support UNII-3 channels. The support here (Kevin/Joseph etc) is excellent so see what they come up with.
- Copy Link
- Report Inappropriate Content
I can confirm your workaround. Been doing this for a while with a 2.5GBe backhaul. Drove me crazy until I realised just let it sync up wirelessly then attach the ethernet cable.
- Copy Link
- Report Inappropriate Content
I've updated my original post to offer a new beta firmware to fix the reported issue where the AX80's web interface menus become invisible after upgrading to the pre-release firmware.
Please download and install it on your AX80 and let me know if it fixes the issue.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Yes, just to confirm that the new Beta firmware Archer AX80(EU/JP)_V1_1.3.1 Build 20250813 has solved the problem with the Dark theme in the browser and the unreadable letters in the MENU.
Now all the letters are clearly visible with the Dark theme in the browser.
Now we just have to wait for the new official firmware to come out. 
Thank you very much.
- Copy Link
- Report Inappropriate Content
Hi@zexoni70 ,
Welcome back.
Have you tried the suggestions that I have send to you:
For 5GHz, please use channel in Band 4, which is channel 149-165.
If the issue persists, please refer to the FAQ below to collect backup file of the router: How to create and restore from a backup file on your TP-Link Router
The tech team has been made aware of your case; they will likely reach out to you via email to continue troubleshooting. The case ID is TKID250830411, please check your email inbox and confirm.
- Copy Link
- Report Inappropriate Content
Dear @Joseph-TP
Of course I tried everything you suggested, but the problem is that it seems that all Archer AX80(EU) devices are for the European market (Serbia Region) and do not support Band 4 and channels 149-165.
The last channel in the drop-down menu that I can select on my AX80(EU) is channel 128 (DFS). 
Attached is a screenshot.
Regards!
- Copy Link
- Report Inappropriate Content
Hi @zexoni70
I’m not sure if you had a look at the workaround I posted which is on the bottom of page 4 on this thread, but the channel and channel width not propagating seems to be only on wired backhaul while wireless backhaul seems to be propagating just fine.
The workaround fixes this issue but should still be looked at by the support team to get this issue totally fixed.
- Copy Link
- Report Inappropriate Content
Got it.
If so, I think you can stay in touch with our engineers. We believe they will provide you with more in-depth analysis and appropriate solutions.
You are also welcome to come back and share your experience!
- Copy Link
- Report Inappropriate Content
Hi@MrJi ,
Thank you for sharing your experience. It seems your solution has been verified by AUUSER.
I will pass your suggestions on to the relevant departments, as they may be helpful for our future product guidance.
We welcome every user to share their experiences and tips, and we are committed to providing high-quality products and services.
Thank you again!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 3847
Replies: 64
Voters 1
