EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

626 Reply
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-17 18:10:45

  @zexoni70

 

At this time you can't access the satelite devices via a browser.

 

I use an Archer C80 as my main router, from the firmware update screen it lets me update the firmware on the satelite devices all from the one screen. 
 

 

 

  1  
  1  
#313
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-17 18:45:10 - last edited 2023-09-17 19:09:40

  @klipse 

 

You're right, my mistake, I didn't see it, there is a firmware update in the section of the main router for each router in satellite mode! wink

 

 

 

 

 

Dear @Kevin_Z 

 

Just to correct that every router in satellite mode shows and broadcasts the guest network, and everything will be extra! 

 

If I can make a proposal to exclude the guest network from Whitelist access control via MAC address, that would make things much easier, because then everyone who comes as a guest for a few hours could access the network without having to disable and turn off Access Control every time! smiley

 

 

 

TRUST NO ONE, THE TRUTH IS OUT THERE!
  0  
  0  
#314
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-18 04:21:42

  @Kevin_Z  When do you update Ethernet Backhaul for Archer AX53?
Now my main router is AX73. And I can't move AX53 to closer to AX73.
But I have a wire from AX73 to AX53.
Hope to get it soon.

  1  
  1  
#315
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-18 08:47:55

Hi  @zexoni70,

I have an AX73 v2 (EU). May I know which url you used to download the firmware?

  0  
  0  
#316
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-18 09:00:30 - last edited 2023-09-18 09:20:14

  @Kevin_Z 

Hi Kevin, 

 

Im trying to set up easy mesh with two Archer C80(US). I have one Version 1.0 which i have upgrade the firmware to support easy mesh.

 

My second unit is a version v2.20. it is on firmware Version: 1.11.5 Build 220627. The tether app tells me that my firmware is up to date. But with the current firmware, i do not see an option for easymesh or changing it to a satellite unit.

 

I live in Singapore and from the support center in my region i can only see and download firmware from C80 Ver1.0. https://www.tp-link.com/sg/support/download/archer-c80/#Firmware

. However from this thread i see that v2.20 is supported for easymesh and i also see the firmware available on the US website.

 

Is there any way i can update the firmware of my v2.20 C80? FYI, I tried downloading and installing the US firmware but it was not successful. 

 

Or do i have to find another version 1.0 in my region?

 

Thanks,

 

-G

  1  
  1  
#317
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-18 09:10:20 - last edited 2023-09-18 09:17:15

  @Avelox 

 

https://www.tp-link.com/en/support/download/archer-ax73/v2/#Firmware

 

This is the link to the latest firmware for the AX73 V2.0 EU models, where the EasyMesh function is now enabled!

 

 

TRUST NO ONE, THE TRUTH IS OUT THERE!
  1  
  1  
#318
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-18 19:40:16 - last edited 2023-09-18 19:41:24

 

 

Is there any way i can update the firmware of my v2.20 C80? FYI, I tried downloading and installing the US firmware but it was not successful. 

 

 

  

  @gxty 

 

Hi,

 

I suggest you check the label on the router another time and verify it does indeed read "Model: Archer C80(US)  Ver:2.20".

 

If it does, then maybe try to upgrade from 1.11.5 to a (US) 1.12.x version first and in case that works, then either stay with it or continue upgrading to (US) 1.13.x.

 

  1  
  1  
#319
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-19 00:34:07

  @woozle 

 

I've tried all 3 firmware version on this link below. and the firmware installation doesnt work.

https://www.tp-link.com/us/support/download/archer-c80/

 

 

let me know what else i can try, thanks.

  0  
  0  
#320
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-19 16:52:32

@Kevin_Z  When will appear Easymesh for EU Archer AX73 v1 routers?

 

Thank you.

  0  
  0  
#321
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-09-19 21:28:07

gxty wrote

  @woozle 

 

I've tried all 3 firmware version on this link below. and the firmware installation doesnt work.

https://www.tp-link.com/us/support/download/archer-c80/

 

 

 

let me know what else i can try, thanks.

  @gxty 

 

I think at this point only TP-Link support would be able to help you further. Maybe there is a bug in this particular firmware version 1.11.5.

 

  0  
  0  
#322
Options